胡玲 2012年進入億博檢測技術有限公司,擔任高級銷售顧問。
精通各類檢測認證標準,服務過上千家企業。 聯系方式:13543272595(微信同號) 座機:0755-29413628
郵箱:huling@ebotek.cn
地址:深圳市寶安新安六路勤業商務中心A棟一樓112-114
掃一掃加工程師微信
資訊中心
深圳億博檢測機構(EBOTEST)
135-4327-2595
掃碼咨詢
歐盟LVD指令新協調標準清單
億博CE認證機構一個專業全面的、經驗豐富的認證服務機構,已有超過十年的檢測認證經驗,擁有資深技術團隊為您提供全方位檢測認證需求,服務熱線:135-4327-2595
2014年5月16日,歐盟在官方公布了原LVD指令(2006/95/EC)新的協調標準清單(OJ C 149, 16.5.2014, p. 33–141)。其中2013年出版的協調標準如下表所示。我們可以看出EN 50117“同軸電纜”(Coaxial cables)和EN 50288“用于模擬和數字通信及控制的多元件金屬電纜”(Multi-element metallic cables used in analogue and digital communication and control)系列標準有大批量更新。
表中第四欄的“DOC”為“被替代標準的推斷符合性中止期”:對于新版標準,到達該日期,被替代標準(舊版標準)及其增補件將不再具有推斷符合性;對于標準的增補件,達到該日期,標準必須與此增補件一起使用,才具有推斷符合性。我們從表中也可以看出,在歐盟,一般新標準與舊標準的過渡期為三年,譬如2013年發布的標準,其執行日期通常為2016年。
標準編號 | 標準名稱 | 采用國際標準 | DOC |
EN ISO 11252:2013 | Lasers and laser-related equipment — Laser device — Minimum requirements for documentation | ISO 11252:2013 | |
EN 50085-1:2005/A1:2013 | Cable trunking systems and cable ducting systems for electrical installations — Part 1: General requirements | 2016-05-20 | |
EN 50117-1:2002/A2:2013 | Coaxial cables — Part 1: Generic specification | 2016-06-17 | |
EN 50117-2-1:2005/A2:2013 | Coaxial cables — Part 2-1: Sectional specification for cables used in cabled distribution networks — Indoor drop cables for systems operating at 5 MHz - 1 000 MHz | 2016-07-01 | |
EN 50117-2-2:2004/A2:2013 | Coaxial cables — Part 2-2: Sectional specification for cables used in cabled distribution networks — Outdoor drop cables for systems operating at 5 MHz -1 000 MHz | 2016-07-01 | |
EN 50117-2-3:2004/A2:2013 | Coaxial cables — Part 2-3: Sectional specification for cables used in cabled distribution networks — Distribution and trunk cables for systems operating at 5 MHz - 1 000 MHz | 2016-07-01 | |
EN 50117-2-4:2004/A2:2013 | Coaxial cables — Part 2-4: Sectional specification for cables used in cabled distribution networks — Indoor drop cables for systems operating at 5 MHz -3 000 MHz | 2016-07-01 | |
EN 50117-2-5:2004/A2:2013 | Coaxial cables — Part 2-5: Sectional specification for cables used in cabled distribution networks — Outdoor drop cables for systems operating at 5 MHz -3 000 MHz | 2016-07-01 | |
EN 50117-4-1:2008/A1:2013 | Coaxial cables — Part 4-1: Sectional specification for cables for BCT cabling in accordance with EN 50173 — Indoor drop cables for systems operating at 5 MHz - 3 000 MHz | 2016-06-17 | |
EN 50288-1:2013 | Multi-element metallic cables used in analogue and digital communication and control — Part 1: Generic specification | 2016-03-18 | |
EN 50288-2-1:2013 | Multi-element metallic cables used in analogue and digital communication and control — Part 2-1: Sectional specification for screened cables characterised up to 100 MHz — Horizontal and building backbone cables | 2016-03-18 | |
EN 50288-2-2:2013 | Multi-element metallic cables used in analogue and digital communication and control — Part 2-2: Sectional specification for screened cables characterised up to 100 MHz — Work area and patch cord cables | 2016-03-18 | |
EN 50288-3-1:2013 | Multi-element metallic cables used in analogue and digital communication and control — Part 3-1: Sectional specification for unscreened cables characterised up to 100 MHz — Horizontal and building backbone cables | 2016-03-18 | |
EN 50288-3-2:2013 | Multi-element metallic cables used in analogue and digital communication and control — Part 3-2: Sectional specification for unscreened cables characterised up to 100 MHz — Work area and patch cord cables | 2016-03-18 | |
EN 50288-4-1:2013 | Multi-element metallic cables used in analogue and digital communication and control — Part 4-1: Sectional specification for screened cables characterised up to 600 MHz — Horizontal and building backbone cables | 2016-03-18 | |
EN 50288-4-2:2013 | Multi-element metallic cables used in analogue and digital communication and control — Part 4-2: Sectional specification for screened cables characterised up to 600 MHz — Work area and patch cord cables | 2016-03-18 | |
EN 50288-5-1:2013 | Multi-element metallic cables used in analogue and digital communication and control — Part 5-1: Sectional specification for screened cables characterized up to 250 MHz — Horizontal and building backbone cables | 2016-03-18 | |
EN 50288-5-2:2013 | Multi-element metallic cables used in analogue and digital communication and control — Part 5-2: Sectional specification for screened cables characterized up to 250 MHz — Work area and patch cord cables | 2016-03-18 | |
EN 50288-6-1:2013 | Multi-element metallic cables used in analogue and digital communication and control — Part 6-1: Sectional specification for unscreened cables characterised up to 250 MHz — Horizontal and building backbone cables | 2016-03-18 | |
EN 50288-6-2:2013 | Multi-element metallic cables used in analogue and digital communication and control — Part 6-2: Sectional specification for unscreened cables characterised up to 250 MHz — Work area and patch cord cables | 2016-03-18 | |
EN 50290-2-23:2013 | Communication cables — Part 2-23: Common design rules and construction — Polyethylene insulation for multi-pair cables used in access telecommunication networks: Outdoor cables | 2016-09-16 | |
EN 50290-2-25:2013 | Communication cables — Part 2-23: Common design rules and construction — Polyethylene insulation for multi-pair cables used in access telecommunication networks: Outdoor cables | 2016-09-16 | |
EN 60061-1:1993/A49:2013 | Lamp caps and holders together with gauges for the control of interchangeability and safety — Part 1: Lamp caps | IEC 60061-1:1969/A49:2013 | 2016-04-02 |
EN 60061-2:1993/A46:2013 |
Lamp caps and holders together with gauges for the control of interchangeability and safety — Part 1: Lamp caps Part 2: Lampholders | IEC 60061-2:1969/A46:2013 | 2016-04-02 |
EN 60061-3:1993/A47:2013 |
Lamp caps and holders together with gauges for the control of interchangeability and safety — Part 1: Lamp caps Part 3: Gauges | IEC 60061-3:1969/A47:2013 | 2016-04-02 |
EN 60127-4:2005/A2:2013 | Miniature fuses — Part 4: Universal modular fuse-links (UMF) — Through-hole and surface mount types | IEC 60127-4:2005/A2:2012 | 2016-01-11 |
EN 60127-7:2013 | Miniature fuses — Part 7: Miniature fuse-links for special applications | IEC 60127-7:2013 | |
EN 60143-2:2013 | Series capacitors for power systems — Part 2: Protective equipment for series capacitor banks | IEC 60143-2:2012 | 2016-01-15 |
EN 60252-1:2011/A1:2013 | AC motor capacitors — Part 1: General — Performance, testing and rating — Safety requirements — Guidance for installation and operation | IEC 60252-1:2010/A1:2013 | 2016-10-03 |
EN 60252-2:2011/A1:2013 | AC motor capacitors — Part 2: Motor start capacitors | IEC 60252-2:2010/A1:2013 | 2016-10-03 |
EN 60335-2-2:2010/A1:2013 | Household and similar electrical appliances — Safety — Part 2-2: Particular requirements for vacuum cleaners and water-suction cleaning appliances | IEC 60335-2-2:2009/A1:2012 | 2015-12-20 |
EN 60335-2-6:2003/A13:2013 | Household and similar electrical appliances — Safety — Part 2-6: Particular requirements for stationary cooking ranges, hobs, ovens and similar appliances | 2015-11-20 | |
EN 60335-2-7:2010/A1:2013 | Household and similar electrical appliances — Safety — Part 2-7: Particular requirements for washing machines | IEC 60335-2-7:2008/A1:2011 (Modified) | 2015-11-20 |
EN 60335-2-17:2013 | Household and similar electrical appliances — Safety — Part 2-17: Particular requirements for blankets, pads, clothing and similar flexible heating appliances | IEC 60335-2-17:2012 | 2015-04-30 |
EN 60335-2-27:2013 | Household and similar electrical appliances — Safety — Part 2-27: Particular requirements for appliances for skin exposure to ultraviolet and infrared radiation | IEC 60335-2-27:2009 (Modified) | 2014-11-21 |
EN 60335-2-34:2013 | Household and similar electrical appliances — Safety — Part 2-34: Particular requirements for motor-compressors | IEC 60335-2-34:2012 | 2015-06-27 |
EN 60432-3:2013 | Incandescent lamps — Safety specifications — Part 3: Tungsten-halogen lamps (non-vehicle) | IEC 60432-3:2012 | 2015-08-08 |
EN 60519-4:2013 | Safety in electroheating installations — Part 4: Particular requirements for arc furnace installations | IEC 60519-4:2013 | 2016-07-24 |
EN 60519-10:2013 | Safety in electroheating installations — Part 10: Particular requirements for electrical resistance trace heating systems for industrial and commercial applications | IEC 60519-10:2013 | 2016-03-29 |
EN 60519-12:2013 | Safety in electroheating installations — Part 12: Particular requirements for infrared electroheating installations | IEC 60519-12:2013 | |
EN 60529:1991/A2:2013 | Degrees of protection provided by enclosures (IP Code) | IEC 60529:1989/A2:2013 | 2016-10-03 |
EN 60598-2-8:2013 | Luminaires — Part 2-8: Particular requirements — Handlamps | IEC 60598-2-8:2013 | 2016-06-03 |
EN 60598-2-11:2013 | Luminaires — Part 2-11: Particular requirements — Aquarium luminaires | IEC 60598-2-11:2013 | 2016-06-20 |
EN 60598-2-12:2013 | Luminaires — Part 2-12: Particular requirements — Mains socket-outlet mounted nightlights | IEC 60598-2-12:2013 | 2016-06-03 |
EN 60598-2-24:2013 | Luminaires — Part 2-24: Particular requirements — Luminaires with limited surface temperatures | IEC 60598-2-24:2013 | 2016-07-24 |
EN 60670-1:2005/A1:2013 | Boxes and enclosures for electrical accessories for household and similar fixed electrical installations — Part 1: General requirements | IEC 60670-1:2002/A1:2011 (Modified) | 2017-12-31 |
EN 60670-24:2013 | Boxes and enclosures for electrical accessories for household and similar fixed electrical installations — Part 24: Particular requirements for enclosures for housing protective devices and other power dissipating electrical equipment | IEC 60670-24:2011 (Modified) | |
EN 60688:2013 | Electrical measuring transducers for converting A.C. and D.C. electrical quantities to analogue or digital signals | IEC 60688:2012 | |
EN 60695-2-10:2013 | Fire hazard testing — Part 2-10: Glowing/hot-wire based test methods — Glow-wire apparatus and common test procedure | IEC 60695-2-10:2013 | |
EN 60695-11-10:2013 | Fire hazard testing — Part 11-10: Test flames — 50 W horizontal and vertical flame test methods | IEC 60695-11-10:2013 | 2016-06-25 |
EN 60934:2001/A2:2013 | Circuit-breakers for equipment (CBE) | IEC 60934:2000/A2:2013 | 2016-02-22 |
EN 60947-2:2006/A2:2013 | Low-voltage switchgear and controlgear — Part 2: Circuit-breakers | IEC 60947-2:2006/A2:2013 | 2016-03-07 |
EN 60947-5-5:1997/A11:2013 | Low-voltage switchgear and controlgear — Part 5-5: Control circuit devices and switching elements — Electrical emergency stop device with mechanical latching function | 2015-12-03 | |
EN 60950-1:2006/A2:2013 | Information technology equipment — Safety — Part 1: General requirements | IEC 60950-1:2005/A2:2013 (Modified) | 2016-07-02 |
EN 60968:2013 | Self-ballasted lamps for general lighting services — Safety requirements | IEC 60968:2012 | 2015-10-31 |
EN 60974-2:2013 | Arc welding equipment — Part 2: Liquid cooling systems | IEC 60974-2:2013 | 2016-02-28 |
EN 60974-5:2013 | Arc welding equipment — Part 5: Wire feeders | IEC 60974-5:2013 | 2016-06-27 |
EN 60974-7:2013 | Arc welding equipment — Part 7: Torches | IEC 60974-7:2013 | 2016-02-28 |
EN 61010-2-201:2013 | Safety requirements for electrical equipment for measurement, control and laboratory use — Part 2-201: Particular requirements for control equipment | IEC 61010-2-201:2013 | 2016-04-01 |
EN 61034-2:2005/A1:2013 | Measurement of smoke density of cables burning under defined conditions — Part 2: Test procedure and requirements | IEC 61034-2:2005/A1:2013 | 2016-05-26 |
EN 61195:1999/A1:2013 | Double-capped fluorescent lamps — Safety specifications | IEC 61195:1999/A1:2012 | 2015-11-16 |
EN 61199:2011/A1:2013 | Single-capped fluorescent lamps — Safety specifications | IEC 61199:2011/A1:2012 | 2015-11-01 |
EN 61347-1:2008/A2:2013 | Lamp controlgear — Part 1: General and safety requirements | IEC 61347-1:2007/A2:2012 | 2016-01-01 |
EN 61347-2-9:2013 | Lamp controlgear — Part 2-9: Particular requirements for electromagnetic controlgear for discharge lamps (excluding fluorescent lamps) | IEC 61347-2-9:2012 | 2015-12-04 |
EN 61439-4:2013 | Low-voltage switchgear and controlgear assemblies — Part 4: Particular requirements for assemblies for construction sites (ACS) | IEC 61439-4:2012 | 2015-12-20 |
EN 61535:2009/A1:2013 | Installation couplers intended for permanent connection in fixed installations | IEC 61535:2009/A1:2012 | 2015-06-20 |
EN 61557-10:2013 | Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. — Equipment for testing, measuring or monitoring of protective measures — Part 10: Combined measuring equipment for testing, measuring or monitoring of protective measures | IEC 61557-10:2013 | 2016-06-03 |
EN 61557-14:2013 | Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. — Equipment for testing, measuring or monitoring of protective measures —Part 14: Equipment for testing the safety of electrical equipment of machinery | IEC 61557-14:2013 | |
EN 61558-2-14:2013 | Safety of transformers, reactors, power supply units and combination thereof — Part 2-14: Particular requirements and tests for variable transformers and power supply units incorporating variable transformers | IEC 61558-2-14:2012 | |
EN 61558-2-16:2009/A1:2013 | Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V — Part 2-16: Particular requirements and tests for switch mode power supply units and transformers for switch mode power supply units | IEC 61558-2-16:2009/A1:2013 | 2016-09-16 |
EN 61558-2-26:2013 | Safety of transformers, reactors, power supply units and combinations thereof — Part 2-26: Particular requirements and tests for transformers and power supply units for saving energy and other purposes | IEC 61558-2-26:2013 | |
EN 61643-21:2001/A2:2013 | Low voltage surge protective devices — Part 21: Surge protective devices connected to telecommunications and signalling networks — Performance requirements and testing methods | IEC 61643-21:2000/A2:2012 | 2015-08-31 |
EN 61730-1:2007/A2:2013 | Photovoltaic (PV) module safety qualification — Part 1: Requirements for construction | IEC 61730-1:2004/A2:2013 | 2016-04-18 |
EN 62026-2:2013 | Low-voltage switchgear and controlgear — Controller-device interfaces (CDIs) — Part 2: Actuator sensor interface (AS-i) | IEC 62026-2:2008 (Modified) | |
EN 62026-7:2013 | Low-voltage switchgear and controlgear — Controller-device interfaces (CDIs) — Part 7: CompoNet | IEC 62026-7:2010 (Modified) | |
EN 62031:2008/A1:2013 | LED modules for general lighting — Safety specifications | IEC 62031:2008/A1:2012 | 2015-12-03 |
EN 62040-1:2008/A1:2013 | Uninterruptible power systems (UPS) — Part 1: General and safety requirements for UPS | IEC 62040-1:2008/A1:2013 | 2016-02-14 |
EN 62196-1:2012/A11:2013 | Plugs, socket-outlets, vehicle connectors and vehicle inlets — Conductive charging of electric vehicles — Part 1: General requirements | 2017-10-15 | |
EN 62196-2:2012/A11:2013 | Plugs, socket-outlets, vehicle connectors and vehicle inlets — Conductive charging of electric vehicles —Part 2: Dimensional compatibility and interchangeability requirements for a.c. pin and contact-tube accessories | 2017-10-15 | |
EN 62395-1:2013 | Electrical resistance trace heating systems for industrial and commercial applications — Part 1: General and testing requirements | IEC 62395-1:2013 | 2016-10-14 |
EN 62444:2013 | Cable glands for electrical installations | IEC 62444:2010 (Modified) | 2016-09-23 |
EN 62606:2013 |
General requirements for arc fault detection devices |
IEC 62606:2013 (Modified) | |
HD 60269-2:2013 | Low-voltage fuses — Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) — Examples of standardized systems of fuses A to K | IEC 60269-2:2013 (Modified) | 2016-08-15 |
HD 60269-3:2010/A1:2013 | Low-voltage fuses — Part 3: Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household and similar applications) — Examples of standardized systems of fuses A to F | IEC 60269-3:2010/A1:2013 | 2016-03-05 |
有產品辦理檢測認證或想了解更多詳情資訊,請聯系億博檢測中心!
億博檢測高級銷售顧問certified engineer
相關文章
此文關鍵詞:LVD指令,歐盟LVD指令,協調標準